Photoelectric Switch Sensor

SCH-FSD22 series high-precision laser displacement sensor

♦Supply voltage: 24V DC, ambient temperature: +20°C, response time: 10ms, and analog output value ofmeasurement centerdistance are used for unspecified measurement conditions, The subiect is white cer

♦Supply voltage: 24V DC, ambient temperature: +20°C, response time: 10ms, and analog output value ofmeasurement center distance are used for unspecified measurement conditions, The subiect is white ceramics

♦This is based on the FDA Standard, accordina to Laser Notice No, 50 of the FDA Standard.

♦This is the size in the measurement center distance. These values were defined by using 1/e2 (approx.13.5%) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point maybe higher than at the point and this may affect the measurement value.


SCH-FSD22 series high-precision laser displacement sensor

SCH-FSD22 series switching analog measurement thickness high and low flatness sensor laser displacement distance sensor

Technical Specification

TypeMeasurement center 100mm type
Part numberAnalog+NPN outputSCH-FSD22-100P-UI
Measurement center distance100mm
Measurement range±35mm
Beam diameter (Note 3)Approx. ø120μm
Repeatability100μm
Linearity±0.3%F.S.
Temperature characteristic0.03%F.S./°C
Light sourceRed semiconductor laser Class 2 [JIS / IEC / GB / FDA (Note 2)] Max. output: 1mW, Emission peak wavelength: 655nm
Supply voltage12 to 24V DC ±10%, Ripple P-P 10% or less
Power consumption40mA or less (at 24V DC supply voltage), 65mA or less (at 12V DC supply voltage)
Control outputControl outputPNP open-collector transistor
•Maximum source current: 50mA
•Applied voltage: 30V DC or less
(Between control output to +V)
•Residual voltage: 1.5V or less
(At 50mA source current)
•Leakage current: 0.1 mA or less
Output operationSwitchable either Light-ON or Dark-ON
Short-circuit protectionIncorporated (Auto reset type)
Analog outputAnalog voltage output•Output range: 0 to +5V (at alarm: +5.2V)
•Output impedance: 100Ω
Analog current output•Output range: 4 to 20mA (at alarm: 0mA)
•Load impedance: 300Ω or less
Response timeSwitchable between 1.5ms / 5ms / 10ms

PNP non-contact input
•Input conditions
Invalid: 0 to +0.6V DC or Open
Valid: +4 to +V DC
•Input impedance: Approx. 10kΩ
ProtectionIP67 (IEC)
Degree of pollution2
Ambient temperature-10 to +45°C (No dew condensation or icing allowed), Storage: -20 to +60°C
Ambient humidity35 to 85% RH, Storage: 35 to 85% RH
Ambient illuminanceIncandescent lamp: Acceptance surface illuminance 3,000ℓx or less
Operating altitude2,000m or less
Cable0.2mm2 5-core composite cable, 2m long
MaterialEnclosure: Aluminum die-cast, Front cover: Acrylic
Weightapprox. 85g (including cable)
Applicable standardEMC Directive Compliance, FDA Standard, UL Recognition


Product Display

Laser displacement sensor

Laser displacement sensor work environments

Laser displacement sensor Panel introduction

Laser displacement sensor Application example

Laser displacement sensor Dimensions

Laser displacement sensor Product display

Laser displacement sensor Wiring diagram

Laser displacement sensor diagram sketch

Laser displacement sensor Wiring diagram sketch

FAQ

Can I get some samples?

Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

 

What's delivery time?

It usually takes about 3-5 working days for small order and 10-15 days for big order.

 

How to solve the quality problems after sales?

Take photos or videos of the problems and send to us.

We will make a satisfied solution for you within 24 hours after we confirm the problems.



热门推荐