Photoelectric Switch Sensor

SCH-JP10MM Position measurement laser sensors

♦Uses a CMOS sensor as a light receiving element, enabling highly accurate edge position measurement of end surfaces.♦Use for equipment where edge control is required, such as for measuring the end of

♦Uses a CMOS sensor as a light receiving element, enabling highly accurate edge position measurement of end surfaces.
♦Use for equipment where edge control is required, such as for measuring the end of component surfaces or sheet materials.
♦Can measure the width of small electronic components or the gaps between rollers.


SCH-JP10MM Position measurement laser sensors
SCH-JP10MM through beam gap edge position measurement laser sensors,Edge gap diameter measurement .

Technical Specification

Model:SCH-JP10MM
Measurement range:edge mode:±5mm                 width mode:10mm
Detection distance(from workpiece)Max.500mm
Light source:wavelengthRed laser 650nm
Max output power7mw
Light spot size:3.5x12mm
Linear accuracy±25μm(when sensing distance 20mm)
Repeat accuracy±5μm (when sensing distance 20mm)
Response time500μs
Temperature drift±0.01%F.S/℃
RGB Indicator lightLong green light on:program restart loading in progress
Slow flashing green light (2Hz):(The optical path is completely blocked)There is no
light atthe receiving end
Fast flashing green light:the sensing lens is dirty and needs to be cleaned
long red light on:equipment power supply
red light turn offAbnormal power supply of equipment
Minimum detection object0.15mm(when distance 100mm)
Supply powerDC 5V±10%
Consumption currentTransmitter<30mA(when DC5V);Receiver<180mA(when DC5V)
Connection typeM84 pin connector
protection degreeIP65
Operation temperature/humidity-10~+50℃/35~85%RH(No condensation,no freezing)
Storage temperature/humidity-20~+60℃/35~85%RH(No condensation,no freezing)
Ambient IlluminanceSunlight:<10000lux,incandescent lamp:<3000lux
Vibration 10~55Hz double amplitude 1.5mm
resistanceX,Y,Z direcitions each 2 hourse
resistanceabout 50G(500 m/s2)
Shock X,Y,Z directions 3 times
Digital outputRS-485
Weight40g (include 300mm cable)
MaterialHousing material:Aluminium alloy lens:glass


Product Display

SCH-JP10MM Product Display

Diameter and gapmeasurement

Gap measurement

FAQ

Can I get some samples?

Yes, Sample order is available for quality check and market test. But you have to pay the express cost.

 

What's delivery time?

It usually takes about 3-5 working days for small order and 10-15 days for big order.

 

How to solve the quality problems after sales?

Take photos or videos of the problems and send to us.

We will make a satisfied solution for you within 24 hours after we confirm the problems.



热门推荐