Stepper

SC130 two-phase stepper driver

SC130 two-phase stepper driverThe SC130 digital 2-phase Stepper drive is based on TI's 32-bit DSP platform and integrated with the micro-stepping technology and the auto tuning of power-up paramet

SC130 two-phase stepper driver

The SC130 digital 2-phase Stepper drive is based on TI's 32-bit DSP platform and integrated with the micro-stepping technology and the auto tuning of power-up parameters. With the features of low noise, low vibration, low heating and high-speed high torque output, it is suitable for most stepper motors.

Typical application: carving machine, cutting machine, screen printing device, numerical control machine, automatic assembly equipment

Product Specification

Pulse modeSingle/double pulse
Signal level3.3~24V compatible,no series resistance required for PLC applications
Power supply voltage110-230V AC
 Typical ApplicationEngraving machines, cutting machines, silk screen equipment, CNC machine tools, automatic assembly equipment, etc
Operating voltage range110VAC-230VAC
Operating current range1.3~7.0A
Matching motor86 series, 110 series, and 130 series or lower motors
Rich control signal interfacePUL&DIR,CW+CCW
Control signal interface level3.3V-24VDC
The entire series provides 8 levels of current and 16 levels of subdivision settings.
Adaptive parameter identification enables the motor to have high-quality noise and performance under various voltage conditions
High reliability, providing overvoltage, overcurrent and other protection functions.

 

Driver function

Driver function  Operating instructions
Microstep fine score settingSW5-SW8 Four dip switches are used to select a total of 16 micro step subdivisions. Please select the correspondingsubdivision by referring to the driver panel, and ensure that the drive is not active when setting.
Output current settingSW1-SW4 Three dip switches are used to select a total of 16 output currents. Please select the corresponding subdivision against the driver panel, and ensure that the driver is not active when setting.
Automatic  half-current  functionSW9 Dip switches are used to ssmoothing function of the drive. off means to turn this feature offand on means to turn it on. SWO is used to select the bandwidth of the drive, the maximum pass pulse frequenc!is 200KHZ when off, and the maximum pass pulse frequency is lMHZ when on.
Signal interfacePUL+ and PUL- for the positive and negative ends of the control pulse signal, DlR+ and DlR- for thepositive and negative end of the direction signal; ENA+ and ENA - for the positive and negative ends ofthe enable signal., AlM+ and ALM- for the positive and negative ends of the alarm signal and RDy+ andRDY- for the positive and negative ends of the place signal.
Motor interfaceA+ and A- are connected to the positive and negative ends ofthe A-phase winding ofthe stepper motor; B+ and B- are connecterto the positive and negative ends ofthe B phase windings of the stepper motor. when the A and B phase windings are switchedthe direction of the motor can be reversed
Power interface The SCl30 working voltage range is reconmmended for AC 110-230V, it is recommended to add an EMl FlLTER before the power supply circuit.
ndicatorsThe drive has two indicator lights, red and green. The green light is the power indicator, and the green lightblinks when the driver is powered on: The red light is the fault indicator, when there is overyoltage.overcurrent fault, the fault light blinks. After the fault is cleared, the red light turns off. When the drive fails, thefault can only be cleared by re-powering and re-enabling it.

 

3SC130 Connections

3SC130

Product Dimensions

R130 Dimensions

 

FAQ

Can we accept samples customized?

No problem for samples order, and welcome your testing before your big order.

 

OEM and ODM are available?

Yes, we accept customized products

 

Can I get a lower price if I order large quantities?

Yes, Cheaper prices with bigger size orders, please contact us and we will give you a quatation.


热门推荐