Stepper

SCH-D20-E Series Servo Drives

SCH-D20-E Series Servo DrivesSCH-D20-E Series Servo Drives is a high performance drive particularly suitable for general use. It has a 3.2kHz frequency response, which could meet the wide range of cus

SCH-D20-E Series Servo Drives

SCH-D20-E Series Servo Drives is a high performance drive particularly suitable for general use. It has a 3.2kHz frequency response, which could meet the wide range of customer's requirement.

Widely used in CNC machine tool, packaging machine, textile machine, wooden machine, etc

Technical Specification

ItemContent
Input power
supply
S2/T2220VAC-10~+10%       50/60Hz
T3380VAC  -10~+10%  50/60Hz
Control mode1.Profile position control mode (PP)
2.Profile velocity mode (PV)
3.Profile torque mode (PT)
4.Homing mode (HM)
5.Cycle synchronous position mode (CSP)
6.Cycle synchronous velocity mode (CSV)
7.Cycle synchronous torque mode (CST)
Energy-loss brakeBuilt-in or External brake resistor (external brake alternative
M1 frame and above 7.5kW drive:No built-in brake resistor.
Other models:Built-in brake resistor
Control
feature
Control typePMSM   motor
Response frequencyPMSM servo:1.2KHz
Baud rate±0.01%(load 0~100%)
Speed fluctuationPMSM:±0.01%(VC,load fluctuation 0 to 100%)
Speed ratio1:10000
EtherCAT
specification
Communication protocoEtherCAT protocol
Support serviceCoE    (PDO,SDO)
Synchronous methodDC distributed clock
Physical layer100BASE-TX
Transmission speed100 Mbit/s(100Base-TX)
Duplex modeFull duplex
Transmission mediaCAT5E class and above shielded cable
Transmission distanceThe distance between 2 nodes <100M
(good surroundings and cables)
Slave stationMax 65535 (lower than 100 in practical use)
Synchronization jitter<lus
Minimum communication
cycle
500us
Input signalControl inputServo enabled,alarm reset,command pulse clear,command pulse prohibited,forward prohibited,reverse prohibited,forward torque imit,reverse torque limit,internal speed selection,internal position triggered,origin/mechanical origin searching triggered,zero speed clamp,probe etc
Encoder  1.Absolute value encoder
  2.Incremental encoder
  3.Rotary transformer
Output

signal
Control outputServo ready,servo alarm,positioning reach,speed reach,electromagnetic brake output,rotation detection,speed limit,homing completed,torque limit etc.
Encoder signal frequency
dividing outpu
1.Encoder Z phases open-collector output;
2.Phase -A,-B:frequency-division differential output(not isolated,any frequency-division ratio Phase-Z is not frequency-division output
3.Z pulse time extended function.
Position

contro
Input modeEtherCAT communication set,internal register: high-speed pulse input
Electronic gear ratio1.0.01≤B/A≤100
2.Support 2 groups of electronic gear,which can be selected or
  switchover by users
Acceleration/DecelerationThe setting range of accel/decel time is 1~30000ms
  (from 0 accelerated to rated speed)
Communication1.RS485/RS232 communication port is connected with PC,to set control parameters and to monitor servo
2.Support EtherCAT bus
Parameter
setting
Keypad  Use 4 keys to set parameter,which is displayed by 5 LEDs.
PC/PLCPC/PLC software can be used to set servo parameter through
  RS485 communication interface
Monitor functionOutput current,PN voltage,motor speed,motor feedback pulse motor feedback revolution,given pulse,given pulse error,given speed,given torque etc
Protection functionMain circuit overvoltage,undervoltage,overload,overcurrent
encoder error,overspeed,abnormal pulse control command
emergency stop,servo overheat,main-circuit power phase-loss
regeneration brake error,position,over position control,lithium
battery alarm,Sync.loss,network initialization failure,sync
cycle setting error,sync.cycle excessive error etc

 

Drive component

SD20-E component

SCH-D20-E connection to peripheral devices

SD20-E connection to peripheral devices

Accessories of SD20-E

Accessories of SD20-E Incremental Encoder Cable

FAQ

Can we accept samples customized?

No problem for samples order, and welcome your testing before your big order.

 

OEM and ODM are available?

Yes, we accept customized products

 

Can I get a lower price if I order large quantities?

Yes, Cheaper prices with bigger size orders, please contact us and we will give you a quatation.


热门推荐