Stepper

SCH-DE2 cost-effective servo driver

SCH-DE2 cost-effective servo driverThe DE2 series is a cost-effective servo system (motor & drive), which can be widely used in a large industry, suchas laser marking machine joint robot, linear m

SCH-DE2 cost-effective servo driver

The DE2 series is a cost-effective servo system (motor & drive), which can be widely used in a large industry, suchas laser marking machine joint robot, linear mechanical hands, wood machinery, glass machinery, injection moldingmachinery, welding and cuting equipment, ceramic equipment, textile equipment, testing equipment, cable equipmentlithium battery equipment, electronic manufacturing equipment, miling machines, grinding machines, CNC lathes, foodproduction lines, packaging production line, engraving and miling machine, engraving machine, high light machinearound line machine, warp knitting machine, labeling machine, veneer machines etc

Technical Specification

ltemSpecifications
Input PowerSingle/three phase 220V,three phase 380V
Voltage variation range (-15%~+10%)50/60Hz
Cooling MethodFan cooling
Main Circuit Control ModeIGBT PWM sine wave mode
Feedback2500 line(standard)/17 bit
Control Mode①Position control ②Speed control ③Torque control ④Position/speed mode switch
⑤Position/torque mode switch ⑥Speed/torque mode switch
⑦Positioning operation mode
Position
Control
Max input
pulse frequency
Line Drive input:Max 500kHz
Open Collector Input:Max 200kHz
Command    pulse
input mode
①Command pulse/command signal ②Forward rotating pulse and reverse
rotating pulse ③A/B phase orthogonal pulse
Command control
mode
①External command pulse input control ②Internal position data control
Electronic gearElectronic Gear N/M times (N:1~4194304)/M:1~4194304)
Torque limitationParameter control (Forward rotating and reverse rotating can be set respectively)/
External analog torque control
Speed
Control
Analog    command
input
VREF DCO~±10V
Speed variation
rate
±1r/min or below (load range 0~100%)
Speed range1:5000
Acceleration and
deceleration time
setting
Acceleration time and deceleration time can be set respectively,and have two groups,
and can accelerate and decelerate with S curve
Speed control
mode
External analog input/Internal speed setting
Torque LimitationParameter control (Forward rotating and reverse rotating can be set respectively)/
External analog torque control
Torque
Control
Analog    command
input
TREF DCO~±10V
Torque LimitationParameter control/External analog speed limitation
Digital
Input/
Outpu
InputEI1~EI66 lines input,the function can be set freely according to the parameter
OutputEncoder pulse outputs by frequency division,A/B phase output by line drive and
Z phase open collector (Total 3 lines)
EOUT1~EOUT33 lines output,the function can be set freely according to the
parameter
MonitorFeedback speed,reference speed,reference torque,motor current,feedback of curre-
nt location,Location Difference,reference pulse frequency,Feedback Pulse Accumul-
ation,Reference Pulse Accumulation,VREF input voltage,TREF input voltage,input
terminal signal,output terminal signal etc
Protection(Alarm display)Overcurrent (oc1,oc2),Over speeding (oS),Overvoltage(Hv),Memory Error (dE),Enc-
oder Error(Ec),Overload (oL1,oL2),Main circuit under voltage (Lu),EI Repeat (ctE),
Deviation overflow (oF),Servo motor drive overheat (AH)etc
Applica-
tion
Environ-
ment
Site locationIndoors (Avoid direct sunlight),No corrosive gas (Avoid smoke,methane)
Ambient
Temperature
0~50℃(When the ambient temperature is higher than the required one
please introduce air circulation)
Storage Temperature-20℃~75℃
Relative humidityRH 90%lower (No condensation)
AltitudeLower than 1000m
Atmospheric pressure86~106kPa
Vibration≤0.5G

SDE2 Front View

Product  Characteristics

SDE2 Product  Characteristics

SDE2 Mechanical Vibration Suppression

Product Wiring diagram

SDE2 Wiring diagram

Optional Accessories

Optional Accessories SCH060201C Servo Motor Model

Servo Motor Model SCH080731B

Servo Motor Model SCH110152C SCH110122B

Servo Motor ModelSCH130132E SCH130152E

FAQ

Can you produce according to the samples or drawings?

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

What is the lead time?

For standard models, lead time is about 3~5 days after order confirmed and payment received.

For OEM orders, the delivery is about 2~3 weeks after data confirmed and payment received.

 

How to solve the quality problems after sales?

Take photos or videos of the problems and send to us.

We will make a satisfied solution for you within 24 hours after we confirm the problems.


热门推荐